Olympus IR-500 - Adjusting the CCD and Image Processing Functions (PIXEL MAPPING)

166
Chapter 7: Customizing your camera
Adjusting the CCD and image processing functions (PIXEL MAPPING)
2 Press a/c to select “FILE NAME.”
Press d to enter the file name settings.
3 Press a/c to select “AUTO.”
4 Press 9.
The file naming method is set to “AUTO” and the screen returns to the setup menu.
Adjusting the CCD and image processing
functions (PIXEL MAPPING)
Pixel Mapping checks and adjusts the CCD and image processing function at the same time. The
CCD and image processing function were adjusted at the factory and you do not need to perform
Pixel Mapping immediately after purchase. This should be performed once a year. Wait for more
than a minute after the camera is used for shooting or playback to allow for most effective Pixel
Mapping performance.
1 Turn the mode dial to q.
The setup menu appears.
FILE NAME
PIXEL MAPPING
VOLUME
RESET
AUTO
O
P
E
N
Q
U
I
C
K
V
IE
W
O
P
E
N
P
O
W
E
R
O
K
Mode dial
9 button
abcd button
s
00E Adam .book Page 166 Tuesday, November 9, 2004 3:24 PM