193
Chapter 8: Printing images
Printing with a PictBridge-compatible printer
Standard settings
All printers that support PictBridge have standard print settings. By selecting “STANDARD”
(g page 199) on the settings screens, images are printed according to these settings. Refer to
the instruction manual of your printer for its standard settings or inquire with the printer’s
manufacturer.
Connecting the camera to a printer
Use the supplied USB cable to connect the cradle to a PictBridge-compatible printer.
1 Turn the printer on and plug the printer end of the USB cable into the
printer’s USB terminal.
For details on how to turn the printer on and locate the USB terminal, refer to the printer’s
instruction manual.
Tip
For details of printing paper types, ink cassettes, etc., refer to the printer’s instruction manual.
Notes
• We recommend using the supplied AC adapter when printing pictures. If you use the battery, make sure
that it is fully charged. If the camera stops operating while communicating with the printer, the printer may
malfunction or image data may be lost.
• Movies cannot be printed.
• The camera will not enter the sleep mode (standby mode) when the connected printer is turned on.
USB terminal
00E Adam .book Page 193 Tuesday, November 9, 2004 3:24 PM
To Next Page
Loading...
