Olympus IR-500 - Connecting the Camera to Your Computer

210
Chapter 9: Using images with your computer
Connecting the camera to your computer
Connecting the camera to your computer
Connect the cradle and your computer using the supplied USB cable, and then set the camera on
the cradle.
1 Connect the supplied USB cable to the USB port of your computer.
For the location of the USB port on your computer, see the manual for the computer.
2 Connect the other end of the USB cable to the USB terminal on the
cradle.
Look this mark as an indication
to connect to the USB port.
USB port
Plug
USB
A/V OUT
(MONO)
DC IN 5V
-
+
00E Adam .book Page 210 Tuesday, November 9, 2004 3:24 PM