Olympus IR-500 - Page 211

211
Connecting the camera to your computer
Chapter 9: Using images with your computer
3 Set the camera on the cradle with the multi-swing display opened.
4 When the “PC / PRINTER” screen appears on the camera’s monitor,
select “PC,” then press 9.
If the screen disappears, turn off the camera and turn it on again, or remove the camera
from the cradle and repeat from step 2.
O
K
Camera connector dial
Turn the dial to select this mark.
PRINT
SEL.PRINT
EXIT
PC / PRINTER
PC
GO SELECT
00E Adam .book Page 211 Tuesday, November 9, 2004 3:24 PM