34
Chapter 2: Preparation
Charging the battery
1 Connect the AC adapter to the cradle.
2 Set the camera on the cradle.
The mark on the camera connector dial indicates the orientation of the camera when the
camera is set on the cradle. Select the mark by turning the camera connector dial
according to the desired camera orientation.
USB
USB
A/V OUT
(MONO)
DC IN 5V
-
+
Cradle
AC adapter
(A511)
To DC input terminal
To a wall outlet
Power cord*
* The shape of the plug differs from country to country.
O
K
Camera connector
dial
Setting the camera with the
multi-swing display opened
Setting the camera with the
multi-swing display closed
Camera connector
dial
Power lamp
Power lamp
00E Adam .book Page 34 Tuesday, November 9, 2004 3:24 PM
To Next Page
Loading...
