56
Chapter 4: Setting according to shooting conditions
Using the self-timer Y
3 Press c to select “ON,” then press 9.
The self-timer is set and shooting mode resumes.
4 Press the shutter button.
The picture will be taken approximately 12 seconds after the shutter button is pressed.
Tips
• The self-timer lamp lights for about 10 seconds
after the shutter button is pressed. Then the self-
timer lamp blinks for two seconds before the
picture is taken.
• The self-timer mode is automatically canceled
after one shot.
• To cancel the self-timer, press a (Y).
Note
Do not operate the self-timer while standing directly in front of the camera lens. The focus and exposure
will not be able to lock.
GO
SELECT
OFF
ON
“Y” appears when self-timer
mode is set.
Self-timer lamp
00E Adam .book Page 56 Tuesday, November 9, 2004 3:24 PM
To Next Page
Loading...
