Olympus IR-500 - Page 58

58
Chapter 4: Setting according to shooting conditions
Selecting a scene mode according to the subject (SCENE SELECT)
3 Press d to enter the scene mode settings, then press a/c to select
the scene mode.
The sample image of the selected scene mode appears.
4 Press 9 to confirm the selected scene mode.
The selected scene mode is assigned to the l position of the mode dial. Press p
to resume the shooting mode with the new settings.
GO SELECT
17 VIVID
GO SELECT
17 VIVID
Vividly reproduce colors.
Uses different way from
program auto.
Then the explanation of the
scene mode appears.
Selected scene mode
4M
4M
The current scene
mode appears.
00E Adam .book Page 58 Tuesday, November 9, 2004 3:24 PM