Olympus IX2-UCB - IX2 Series Note on Operation in Stand-alone Mode

IX2-UCB/U-HSTR2
CONTENTS
IMPORTANT — Be sure to read this section for safe use of the equipment. —
1-2
1 NOMENCLATURE
2 OPERATION
2-1 Control Box IX2-UCB-2............................................................................................................................................................. 5
1 Turning Power On 2 Functions of Indicator LEDs
2-2 Hand Switch U-HSTR2 .............................................................................................................................................................. 5
1 Attaching Indication Stickers 2 Grouping Panel Sheet
2-3 Operation Selection of the DIP Switches ........................................................................................................ 6
PROPER SELECTION OF THE POWER SUPPLY CORD.......................................................... 17- 18
3-4
5-6
IX2 SERIES MOTORIZED SYSTEM
þ
Note on operation in stand-alone mode
ý
When the IX81 motorized revolving nosepiece is rotated in stand-alone mode (without a PC), automatic
escape movement of an objective (prevention of interference between the objective and stage) is not
performed. Therefore, when using an objective with a short working distance, let the motorized
revolving nosepiece escape once before pressing the objective switching button.
3-10
3 SPECIFICATIONS
4 TROUBLESHOOTING GUIDE
5 ASSEMBLY
- If you intend to assemble the unit by yourself, read this section first. -
GX SERIES MOTORIZED SYSTEM
1 MOTORIZED SYSTEM DIAGRAM
2 NOMENCLATURE
7
8
9-10
11- 16
12-13
14-16
Downloaded from ManualsNet.com search engine