11
GX SERIES MOTORIZED SYSTEM
For the motorized modules that can be mounted on the system, see Chapter 1, "MOTORIZED SYSTEM DIAGRAM" on
page 12 Using an unsuitable module hinders the system from manifesting its full performance.
Combination of the IX2-UCB-2 control box and U-HSTR2 hand switch are required to control the motorized modules.
Configuration of Instruction Manuals
The instruction manuals for the motorized modules are provided separately as shown in the following table. This
instruction manual from this page on pertains to the instructions of the GX-RTUA motorized mirror unit turret and the
features specific to the system using it.
Manual Name Main Contents
IX2-UCB/U-HSTR2
Control Box/Hand Switch
Functions of the control box (including power supply) and hand switch in
combination with the IX2 Series are described in the first half. Operations
with the original assembly of the GX71/GX51 motorized system are
described in the second half.
U-FWT/FWR/FWO
Motorized Filter Wheels
Functions of the motorized filter wheels (only the U-FWR is usable with
this system) are described.
If your GX71 or GX51 is provided with the manual entitled “GX71/GX51 Motorized System", please
discard it because it has errors.
NOTE
Downloaded from ManualsNet.com search engine
To Next Page
Loading...