Olympus OM-1 - The Shutter Releasing Position of the Button too Deep or too Shallow; Excessive or Insufficient Leeway in the; Heavy Touch of the Shutter Release Button.10

E-.10
10. The shutter releasing position of the button too deep or too shallow.
Excessive or insufficient leeway in the button motion after the shutter
release.
1) Improper adjustment of CA9068 (Collar).
9068 should be adjusted so that the mirror commences its operation
when the distance between the oblong hole of 8862 and 8864 at their
edges is 0.3~ 0.5.
Checkup
o Make sure 9065 does not hit 8432 (Hook) prior to or during the
film advancing motion.
o Taking the upper edgesurfacepf 9083 as the basis, the shutter
should be released within 0 -olz*
11. Heavy touch of the Shutter Release Button
1) Operation of CA9078 (Plate)
2) Releasing force of the CA8432 (Hook) too heavy.
Checkup
o
The releasing force of (8432) should be 50 gr. or below.