Olympus OM-1 - Dial Gear Operation

E-44
5. Dial Gear Operation:
1) Adjustment of CA8944 (String)
8944 (the string for the dial gear) should be threaded as follows.
When threading, it should be started from the arrowed X* direction
to avoid crossing with the String.
Checkup
o If the meter is not mounted onto the Front Die-Casting, attach a
12 gr. weight at the tip of the string and check the operation.
o Each pulley is to turn smoothly and accurately.
o Tolerance on the dial gear should be 0.1 or less.
o When the dial gear is rotates, 8924 should not move.
http://0Ivmpus.dcmentia.0r2/Hardwiirc
r • r n