Olympus OM-1 - Page 83

D-17
6. Disassembly of CA8961 (Frame) and the exposure meter
1) Remove HK1.7 - 405SN on CA8981 (Holder).
Then comes off CA8981.
2) Remove CA9011 (Holder). Then comes off CA9010 (Cam).
3) Remove HK1.4 - 101SN on CA8995 (Base).
4) Remove two CA9142 (Screw).
Then will come off in a unit:
CA8977 (Plate)
CA8996 (Gear)
CA8998 (Shaft)
CA8999 (Spring)
5) Remove CA9021 (Spring) from CA8995 (Base) #951 exposure meter
mechanism is removed together with CA8982.
6) Remove two PUK2 x 3SO on CA8995.
Then comes off CA8995.
http://olvnif iware