4
EN
Taking photographs
1
Press the n button to turn on the camera.
When the camera is turned on, the monitor will turn on.
2
Set the mode dial to P.
3
Frame the shot.
The viewfinder turns on and the monitor turns off automatically when you put your eye to the
viewfinder.
• When holding the camera, take care not to cover the flash, microphone or other important
parts with your fingers, etc.
You can also shoot with viewing the back monitor.
4
Press the shutter button halfway
down to focus.
The camera was unable to focus if
the AF target mark flashes red. Try
focusing again.
125125 F5.6
ISO-A
160
01:02:0301:02:03
10231023
P
Shutter speed Aperture value
AF target
Press halfway
5
To take the picture, gently press the
shutter button all the way down while
being careful not to shake the camera.
Press halfway
Press the rest of
the way down
• If the display in the viewfinder looks blurry, look through the viewfinder and rotate the diopter
adjustment dial until the display is in sharp focus.
• You can also take photographs using the touch screen.
Viewing photographs
Press the q button.
• Your most recent photograph is displayed.
• Press HI or turn the sub dial to select an image.
Erasing still images
Display an image you want to delete and press G (). Select [Yes] and press Q.
d4572BasicE.indb4d4572BasicE.indb4 2013/10/0416:03:132013/10/0416:03:13