EasyManua.ls Logo

Olympus SZX2 Series - Troubleshooting Guide

Olympus SZX2 Series
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
TROUBLESHOOTING GUIDE
Under certain conditions, performance of this equipment may be adversely affected by factors other than defects. If a problem
occurs, please review the following list and take remedial action as needed.
If you cannot solve the problem after checking the entire list, please contact your local Olympus representative for assistance.
Problem Cause Remedy
Field of view is not evenly illuminated.
The light guide is not mounted properly. Mount the light guide properly.
The bulb of the light source unit is not
mounted properly.
Mount the bulb properly.
Color reproduction in the photography is
poor.
The brightness control of the power trans-
former is not set to the maximum posi-
tion.
Set the brightness control to the maxi-
mum position.
The filters (30.5S-LB80 and 30.5-LBD) are
not used (when a daylight type film is in
use).
Mount the filters (30.5S-LB80 and 30.5-
LBD) on the LG-PS2 light source unit.
Contrast is poor.
The quarter-wave plate is not adjusted.
Adjust the plate. (Page 9)
The view is noticeably different between
the left and right fields of view.
The quarter-wave plate clamping posi-
tion is not adjusted properly.
Adjust the clamping position correctly.
(Page 9)

Related product manuals