6
The following symbols are placed on the product.
Study the meaning of the symbols and always use the product in the safest possible manner.
Symbol Meaning
Indicates a non-specific general hazard. Follow the description given after this symbol or
in the instruction manual.
Indicates that the surface becomes hot. Do not touch with bare hands. You may get
burned.
Indicates that the seesaw type main switch is ON.
(Seesaw type is the type of switch where ON or OFF is selected by pressing it to ON or
OFF side.)
Indicates that the seesaw type main switch is OFF.
If caution labels are dirty or peeled off, contact Olympus for replacement or inquiries.
Safety warning symbols
Label position and instruction
The labels are attached to the portions which require special cautions during use and operation. Be sure to follow these
instructions.
Label Label position Instructions in instruction manual Page
Back of U-LGPS
Caution for electric safety and
prevention of electric shock
4
U-LGPS liquid light guide insertion port High temperature 5
If caution labels are dirty or peeled off, contact Olympus for replacement or inquiries.
To Next Page
Loading...
