Inspection
MOBILE WORKSTATION WM-DP1
21
Chapter 5 Inspection
WARNING
Should the slightest irregularity be suspected, do not use the mobile
workstation and refer to Chapter 11 Troubleshooting. If the problem
cannot be resolved, contact Olympus for service.
1. Check the power supply cable and plug for damage, twists, deformation or other
irregularities.
2. Where antistatic castors are fitted, periodically check the electrical resistance of the
conductive antistatic castors to assess antistatic effectiveness.
3. Check the security of castors at six-monthly intervals. If loose, contact Olympus for service.
4. Regularly check the shelf fixing screws and the fixing screws of any accessories that are
fitted, particularly monitor mounts. If necessary, retighten the screws using the tools
provided.
To Next Page
Loading...
