Standard Set and Accessories
MOBILE WORKSTATION WM-DP1
3
Chapter 1 Standard Set and Accessories
Please refer to the standard set below and check that all items are present. Contact Olympus
if any parts are damaged or missing. Workstations that are fitted with antistatic castors can
be identified by the following label affixed to the rear of each shelf.
1
Contents Qty
1 WM-DP1 mobile workstation (includes separation transformer) 1
2 Rear panel - narrow 1
3 Rear panel - wide 1
4 Blister pack 1
Blanking cap (cable port, 2pcs)
Blanking cap (monitor port, 2pcs)
Blanking cap (scope pole, 2pcs)
L-wrench ball driver 6mm A/F, 1 piece
Cable tie, 6 pcs
5 Blister pack 1
Blanking cap (cable port, 2pcs)
Blanking cap (monitor port, 1 piece)
6 Instruction manual 1
7 Cable hanger 2
8 Universal IEC cable 2.5m 4
Universal IEC cable 1.5m 4
9 IEC adaptor cable (USA only) 2
10 MAJ-181 restrictor assembly 2
INSTRUCTIONS
4
7
6
5
9
2
3
8
10
To Next Page
Loading...
Need help?
General
