Olympus WS 700M - File Menu Options; Recording Menu Options

49
5
EN
Menu setting method
Menu setting method
, Rec Menu
Mic Sense
Microphone sensitivity is adjustable to meet
recording needs.
[High]: Highest recording sensitivity suitable
for recording at a distance or low volume,
such as at conferences with a large
number of people.
[Middle]: Suitable for recording meetings
and seminars with a small number of
people.
[Low]: Lowest recording sensitivity suitable
for dictation.
• When you would like to clearly record
a speaker’s voice, set [Mic Sense] to
[Low] and hold recorder’s built-in stereo
microphone close to the speaker’s mouth
(5-10 cm) when recording.
Rec Mode
The recorder can record in the linear PCM
format (For WS-710M, WS-700M only). High
resolution recording at a high sampling rate
and high bit rate equivalent or superior to
that of a music CD is possible. Moreover, it
also supports the MP3 and WMA formats.
1 Select the recording format.
[PCM]*: This is an uncompressed audio
format which is used for music CDs
and the like.
[MP3]: MPEG is the international
standard established by a working
group of the ISO (International
Organization for Standardization).
[WMA]: This is an audio compression
encoding method that was
developed by the Microsoft
Corporation in the US.
* For WS-710M, WS-700M only.
+ File Menu
Erase Lock
Locking a file keeps important data from
being accidentally erased. Locked files are
not erased when you select to erase all files
from a folder (☞ P. 39).
[On]:
Locks the file and prevents it from being
erased.
[Off]:
Unlocks the file and allows it to be erased.
Replace
Refer to “Rearranging files [Replace]”
(☞ P. 59).
File Divide
Refer to “Dividing Files [File Divide]”
(☞ P. 60).
Property
File and folder information can be
confirmed from the menu screen.
When the file is selected:
[Name] (File name), [Date] (Time stamp),
[Size] (File size), [Bit Rate]*1 (File format),
[Artist]*2 (Artist name) and [Album]*2
(Album name) will appear on the display.
*1 When a linear PCM format  le has been
selected, [Bit Rate] area displays the
sampling frequency and bit rate.
*2 When a  le contains no tag information,
the display contents of this area are blank.
When [Recorder] is selected, [Artist] and
[Album] will not appear on the display.
When the folder is selected:
[Name] (File name), [Folder]*1 (Number
of folder) and [File]*2 (Number of file) will
appear on the display.
*1 When [Recorder] is selected, [Folder] will
not appear on the display.
*2 Files which cannot be recognized by this
recorder are not included in the number
of  les.
• Select the files for which you would like
to confirm information in advance before
operating the menu.