Olympus WS 700M - LCD;Sound Menu Options

56
5
EN
Menu setting method
Menu setting method
[Scene Save]:
You can save up to 5 sets of menu
settings relating to a current
playback.
• If you select [Scene Select], proceed
to the operation of Step 4.
When [ Scene Save ] is selected:
2 Set the playback settings
according to your preferences.
3 Specify a save destination for the
settings.
For WS-710M, WS-700M only:
• You can select the save destination
from among [Voice 1] to [Music 3].
For WS-600S only:
• You can select the save destination
from among [Voice 1] to [Voice 5].
When [ Scene Select ] is selected:
4 Select the playback scene.
To check the settings:
On the [Scene Select] display, select
a playback scene using the + and
- buttons, and press the 9 button.
Press the 0 button to return to the
[Scene Select] display.
. LCD/Sound Menu
Backlight
The display will remain lit for about 10 (Initial
setting) seconds when a button on the
recorder is pressed.
[Off]:
Disables this function.
[5seconds] [10seconds] [30seconds]
[1minute]:
Enables the Backlight function.
Contrast
Display contrast can be adjusted in 12 levels.
• You can adjust the LCD display contrast
level from [01] to [12].
LED
You can set it so the LED indicator light does
not turn on.
[On]:
LED light will be set.
[Off]:
LED light will be cancelled.
Beep
The recorder beeps to alert you to button
operations or warn you of errors. System
sounds may be turned off.
[On]:
Enables the Beep function.
[Off]:
Disables this function.
Language(Lang)
You can select the display language for this
recorder.
[English] [Français] [Español]
[Português (BR)]:
Example:
WS-710M, WS-700M