1.3 Before You Begin
Inspecting Your Shipment:
Remove the packing slip and verify that you have received everything
listed. Inspect the container and equipment for signs of damage as soon
as you receive the shipment. Note any evidence of rough handling in
transit. Immediately report any damage to the shipping agent. The carrier
will not honor damage claims unless all shipping material is saved for
inspection. After examining and removing the contents, save the packing
material and carton in the event reshipment is necessary.
Customer Service:
If you need assistance, please call the nearest Customer Service
Department, listed in this manual.
Manuals, Software:
The latest Operation and Communication Manual as well as free software
and ActiveX controls are available at the website listed on the cover
page of this manual or on the CD-ROM enclosed with your
shipment.
For first-time users: Refer to the QuickStart Manual for basic operation
and set-up instructions.
If you have the Serial Communications/Ethernet Option you can easily
configure the controller on your computer or on-line.
To Reset the Meter:
When the monitor is in the "MENU" Mode, push c once to direct monitor
one step backward of the top menu item.
Push c twice to reset monitor, prior to resuming "Run" Mode except
after "Alarms", that will go to the "Run" Mode without resetting the
monitor.
4
To Next Page
Loading...
Need help?
General
