THERMOMETER
Problem Solution
The thermometer does a. Check for proper wiring
not turn on (No Display) connections, see Section 3.2
b. Contact our Customer Service
Department, unit requires service.
a. Make sure you have entered the
correct emissivity setting.
b. Make sure you are not trying to
measure a temperature above the
maximum temperature range of
your model.
The thermometer is a. Try to remove and then re-apply
“locked up” (the power to reset the unit.
display is “frozen”).
b. Contact our Customer Service
Department, unit requires service.
Troubleshooting Guide
6
The thermometer is
showing an incorrect
temperature
6-1
To Next Page
Loading...
