LVS-7500 External System Operations Manual
LVS-7500 External System Operations Manual Page 19 of 129
Option Description
Discard changes Click this button to discard any changes made to any operator details.
Save changes Click this button to save changes made to any operator details.
Done Click this button after all changes are complete.
Permissions
Operator permissions are described in the table below.
Permission Description
Allow Create NEW Job Allows the operator to create/edit/delete a job.
Allow Load EXISTING Job Allows the operator to load existing jobs. Note that you are not allowed
to edit existing jobs.
Allow Calibration Allows the operator to perform calibration.
Allow Administration Allows the operator access to the “Administration” menu bar feature
where operators and operator permissions are set up. See the
“Administration” section for more information.
Allow Accept / Replace Errors Allows the operator to accept or replace errors.
Allow Bypass / MakeReady Allows the operator the ability to use the “Bypass” and “MakeReady”
buttons on the “Operate Screen: Running the Job.”
To Next Page
Loading...