Omron 10 Series User Manual

26
3. Using Your Monitor without a Smart Device
3. Press the [START/STOP] button to turn your
monitor off.
Note
• Your monitor automatically turns off after 3 minutes.
• Wait 2 - 3 minutes between measurements. The wait time
allows the arteries to decompress and return to their pre-
measurement state. You may need to increase the wait time
depending on your individual physiological characteristics.
 Using the TruRead Mode
Set the TruRead mode “on” to use the TruRead mode. Refer to sub-
section 2.4.
1. Select your user ID.
2. Press the [START/STOP] button.
The arm cuff starts to inflate automatically.
After the first measurement is complete, wait for the next
measurement to start.
The interval you selected during TruRead settings will appear
on the display.
INFLATINGSTART DEFLATING COUNTDOWN

Omron 10 Series Specifications

General

Display	LCD
Technology	Advanced Accuracy
Bluetooth Connectivity	Yes
Irregular Heartbeat Detection	Yes
Hypertension Indicator	Yes
Pressure Range	0 to 299 mmHg
Pulse Rate Range	40 to 180 beats/min
Average Reading	Yes
Power Source	4 AA batteries or AC adapter
Cuff Size	ComFit Cuff (fits arms 9 to 17 inches in circumference)
Memory Storage	200 readings (100 readings each for 2 users)
Weight	Approx. 400g (without batteries)