Omron 10 Series User Manual

25
3. Using Your Monitor without a Smart Device
3.1 Taking a Measurement
You can use your monitor without pairing to a smart device. To pair
your monitor with a smart device, refer to sub-section 4.1.
Note
•To stop the measurement, press the [START/STOP] button once to
deflate the arm cuff.
Caution
• DO NOT use this monitor with other medical electrical (ME) equipment
simultaneously. This may result in incorrect operation of the monitor and/or
cause an inaccurate reading.
• Remain still and DO NOT talk while taking a measurement.
1. Press the [START/STOP] button.
All symbols appear on the display before starting the
measurement.
2. Remain still and do not talk until the entire
measurement process is complete.
The “ ” symbol flashes at every heartbeat.
After your monitor has detected your blood pressure and
pulse rate, the cuff automatically deflates. Your blood
pressure and pulse rate are displayed with the previous
reading.
If either the systolic or the diastolic reading is high (refer to
sub-section 1.3), the “ ” symbol appears.
INFLATING
START
COMPLETED

Omron 10 Series Specifications

General

Display	LCD
Technology	Advanced Accuracy
Bluetooth Connectivity	Yes
Irregular Heartbeat Detection	Yes
Hypertension Indicator	Yes
Pressure Range	0 to 299 mmHg
Pulse Rate Range	40 to 180 beats/min
Average Reading	Yes
Power Source	4 AA batteries or AC adapter
Cuff Size	ComFit Cuff (fits arms 9 to 17 inches in circumference)
Memory Storage	200 readings (100 readings each for 2 users)
Weight	Approx. 400g (without batteries)