EasyManuals Logo

Omron 10 Series User Manual

Omron 10 Series
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
2. Preparation
21
2.6 Applying the Arm Cuff
Note
The following steps are for applying the arm cuff to your left arm.
When you take a measurement on your right arm, follow the cuff
wrap instructions for a right arm use mentioned under “To take a
measurement on your right arm” located at the end of this sub-
section.
The blood pressure can differ between the right arm and the left
arm, and the measured blood pressure readings can be different.
OMRON recommends to always use the same arm for
measurement. If the readings between both arms differ
substantially, check with your physician to determine as to which
arm to use for your measurements.
Caution
Remove tight-fitting, thick clothing from your arm while taking a
measurement.
1. Plug the arm cuff into your monitor by inserting
the air plug into the air jack securely until it
clicks.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Omron 10 Series and is the answer not in the manual?

Omron 10 Series Specifications

General IconGeneral
DisplayLCD
TechnologyAdvanced Accuracy
Bluetooth ConnectivityYes
Irregular Heartbeat DetectionYes
Hypertension IndicatorYes
Pressure Range0 to 299 mmHg
Pulse Rate Range40 to 180 beats/min
Average ReadingYes
Power Source4 AA batteries or AC adapter
Cuff SizeComFit Cuff (fits arms 9 to 17 inches in circumference)
Memory Storage200 readings (100 readings each for 2 users)
WeightApprox. 400g (without batteries)

Related product manuals