Omron 10 Series User Manual

36
6. Other Settings
5. Press [START/STOP] button to turn your
monitor off.
Note
• All readings will be deleted. You cannot partially delete the
readings stored in the memory.
• Your monitor automatically turns off after 2 minutes.
6.2 Restoring Your Monitor to the Default Settings
To delete all the information stored in your monitor, follow the
instructions below. Make sure that your monitor is turned off.
1. While holding the button (rear surface of the
monitor) down, press and hold the [START/
STOP] button for more than 3 seconds.
The display to the right flashes.
2. While holding the button down, press and
hold the [START/STOP] button for more than 3
seconds.
The display stops flashing, then your monitor is restored to
the default settings.

Omron 10 Series Specifications

General

Display	LCD
Technology	Advanced Accuracy
Bluetooth Connectivity	Yes
Irregular Heartbeat Detection	Yes
Hypertension Indicator	Yes
Pressure Range	0 to 299 mmHg
Pulse Rate Range	40 to 180 beats/min
Average Reading	Yes
Power Source	4 AA batteries or AC adapter
Cuff Size	ComFit Cuff (fits arms 9 to 17 inches in circumference)
Memory Storage	200 readings (100 readings each for 2 users)
Weight	Approx. 400g (without batteries)