Options
40
Digital Operator
3G3IV-PJVOP140/PJVOP146
The Digital Operator (3G3IV-PJVOP140/PJVOP146) is used to control the Inverter from a distance. There are two models available.
The 3G3IV-PJVOP140 is equipped with an adjuster and the 3G3IV-PJVOP146 is not.
Always use the 3G3IV-PJVOP140 together with a Digital Operator Case (3G3IV-PEZZ08386A). Without the Case, the Digital Opera-
tor’s connection cable cannot be wired. Using the Case also enables mounting to a control panel.
Note: When a Digital Operator is connected, the Operator on the Inverter cannot be used to control operation (i.e., only display
functions will work).
3G3IV-PJVOP140 (with Adjuster)
8 max.
3.6 dia
3G3IV-PJVOP146 (without Adjuster)
Four, 4.4-dia. mounting holes
Four depressions for M4
bolts (Depth: 3.5)
To Next Page
Loading...
