14
APPLYING THE WRIST CUFF
APPLYING THE CUFF ON THE LEFT WRIST
1.  Roll up sleeve. Make sure your sleeve is not rolled up 
too tightly on your arm. This may constrict the flow of 
blood in your arm.
2.  Put your arm through the cuff loop. Your palm 
should face upward.
3.  Position the cuff leaving a clearance of approximately 
1/2 inch (1 cm to 2 cm) between the cuff and the bottom 
of your palm.
4.  Wrap the wrist cuff firmly around your wrist. 
Do not apply over clothing.