Omron BP791IT - Confirm TruRead Settings; Set Measurement Interval

4.Press.the.SET.button.to.confirm.the.change
If.on.is.selected,.the.number.of.seconds.between.each.measurement.is.
displayed
NOTE:..The.default.value.between.each.measurement.is.60.seconds
5..Press.the.Up.or.Down.button.( / ).to.change.the.interval.of.
time.between.each.measurement
The.interval.can.be.set.to.15.seconds,.30.seconds,.60.seconds.or.120.
seconds.Continue.to.press.the.Up.or.Down.button.until.the.desired.
interval.appears.on.the.display
6..Press.the.SET.button.to.confirm.the.setting
The.year.flashes.on.the.display
SETTING TRUREAD
TM
24