Omron BP791IT - Using the TruRead Mode; TruRead Progress Check




1.Select.your.USER.ID.(A.or.B)
2.Press.the.START/STOP.button
. All.symbols.appear.on.the.display.The.USER.ID.Symbol.you.selected.
flashes.on.the.display.The.cuff.starts.to.inflate.automatically
. NOTE:..To.stop.the.inflation.or.measurement,.press.the.START/STOP.
button.The.monitor.will.stop.inflating,.start.deflating.and.will.
turn.off
3.Inflation.stops.automatically.and.the.measurement.is.started
. As.the.cuff.deflates,.decreasing.numbers.appear.on.the.display..
The.Heartbeat.Symbol.(
).flashes.at.every.heartbeat.When.the.
measurement.is.complete,.the.arm.cuff.completely.deflates
. NOTE:..Do.not.move.your.arm.and.remain.still.until.the.entire.
measurement.process.is..completed
4.Check.the.progress.of.the.consecutive.measurements
. NOTE:..If.a.measurement.fails,.the.monitor.will.repeat.taking.
a.measurement.up.to.five.times.during.the.consecutive.
measurement.process
. The.first.measurement.is.complete,.waiting.to.start.the.next.
measurement.The.interval.of.time.set.between.each.measurement.will.
appear.on.the.display
TAKING A MEASUREMENT
35