216
Built-in Outputs Section 7-1
DM Area Settings Speed Control Settings to Feed Wrapping Material to Initial Position
Positioning Control Settings for Wrapping Material
Setting details Address Data
Acceleration rate: 500 Hz/4 ms D00000 #01F4
Target frequency: 10,000 Hz D00001 #2710
D00002 #0000
Setting details Address Data
Acceleration rate: 500 Hz/4 ms D00010 #01F4
Deceleration rate: 500 Hz/4 ms D00011 #01F4
Target frequency: 10,000 Hz D00012 #2710
D00013 #0000
Number of output pulses: 5,000 pulses D00014 #1388
D00015 #0000
Starting frequency: 0 Hz D00016 #0000
D00017 #0000
To Next Page
Loading...
