Omron CJ2M-CPU Series Connection Guide

7
．
Serial Communications Connection Procedure
32
2
Select Operating Mode -
Monitor from the PLC Menu.
3
The confirmation dialog box on
the right is displayed.
Confirm that there is no
problem, and click Yes.
4
Check that the operating mode
changes to Monitor Mode.
5
In the Ladder Section Window,
right-click Input_Start and
select Set - On.
6
Check that the Input_Start
contact is turned ON as shown
in the figure on the right.

Omron CJ2M-CPU Series Specifications

General

Power Supply	24 VDC
Number of Instructions	Over 400 instructions
Model	CJ2M-CPU11, CJ2M-CPU12, CJ2M-CPU13, CJ2M-CPU14, CJ2M-CPU15
Program Capacity	5K steps to 60K steps
I/O Capacity	Up to 2, 560 points
Communication Ports	Ethernet, USB, RS-232C
Execution Time	0.04 µs per basic instruction
Operating Temperature	0 to 55°C
Position Control	Supported
High-speed Counter	100 kHz max.
Pulse Output	100 kHz max.
Maximum Units	40 units
Storage Temperature	-20 to 75°C
Interrupt Inputs	Supported