Omron CJ2M-CPU Series Connection Guide

8
．
Initialization method
38
8.1.2. CPU Unit
To initialize the CPU Unit settings, select Clear All Memory Areas from the PLC Menu in
CX-Programmer. Select Initialize in the Confirm All Memory Area Clear Dialog Box and click
OK.
8.2. Initializing Oriental Motor Driver
For information on how to initialize Oriental Motor Driver, refer to Resetting data of applicable
product to factory default settings of the Data setting software MEXE02 OPERATING
MANUAL (HM-60131).

Omron CJ2M-CPU Series Specifications

General

Power Supply	24 VDC
Number of Instructions	Over 400 instructions
Model	CJ2M-CPU11, CJ2M-CPU12, CJ2M-CPU13, CJ2M-CPU14, CJ2M-CPU15
Program Capacity	5K steps to 60K steps
I/O Capacity	Up to 2, 560 points
Communication Ports	Ethernet, USB, RS-232C
Execution Time	0.04 µs per basic instruction
Operating Temperature	0 to 55°C
Position Control	Supported
High-speed Counter	100 kHz max.
Pulse Output	100 kHz max.
Maximum Units	40 units
Storage Temperature	-20 to 75°C
Interrupt Inputs	Supported