Installing the Drivers
30
Select the Search for the best driver in there locations and check the Include this
location in the search.
4. Insert the CD-ROM containing the driver (the CD-ROM is in the same package as
the Conversion Cable) into the computer's CD-ROM drive. Click the Browse button,
select the following directory of the CD-ROM and click the OK button.
Windows XP/ Vista/ 7/ 8: WinXP_Vista_7_8
Windows 2000: Win2K
Windows 98/ Me: Win98_Me
Click the Next button in the Please choose your search and installation options
window.
5. The following window will be displayed. Click the Continue Anyway button to start
installing the driver.
6. The following window will be displayed if the driver was installed properly. Click the
Finish button.
7. When the Finish button is clicked in step 6, the installation of the USB Serial Port
driver will be automatically started.
Follow the same procedure in steps 1 through 6 to install the USB Serial Port driver.
(Driver installation is completed after installation of the USB Serial Port driver.)
8. When the installation is completed, the communications port (COM port) number will
be automatically allocated. Refer to the Verifying the Allocated Communications Port
on page 37 for how to confirm the allocated communications port number.
To Next Page
Loading...
Need help?
General
