C-2
DeviceNet Connection Hardware Appendix C
Appendix C
Crimp Terminals for DeviceNet Communications Cables
Terminating Resistors for DeviceNet Network
A Terminating Resistor can also be connected to a T-branch Tap or a one-branch Power Supply Tap.
T- br a n c h Ta p s
One-branch Taps
Three-branch Taps
Model Crimper Remarks Manufacturer
AI series:
AI-0.5-6WH for Thin Cable
(product code: 3200687)
ZA3 For single-wire insertion PHOENIX CONTACT
AI series:
AI-0.25-6BU for Thin Cable
(product code: 3201291)
UD6
(product code: 1204436)
For two-wire insertion
(multi-drop wiring)
Model Specifications Manufacturer
DRS1-T Terminal-block Terminating Resistor, 121 Ω ±1% 1/4 W OMRON
DRS2-1 Shielded Terminating Resistor (male plug), micro-size (M12)
DRS2-2 Shielded Terminating Resistor (female socket), micro-size (M12)
DRS3-1 Shielded Terminating Resistor (male plug), mini-size
Model Specifications Manufacturer
DCN1-1C Includes three XW4B-05C1-H1-D parallel connectors with screws
(When used on a trunk line, one branch line can be connected.)
Connector insertion direction: Horizontal
A Terminating Resistor (included as standard) can be connected.
OMRON
DCN1-2C Includes three XW4B-05C1-H1-D parallel connectors with screws
(When used on a trunk line, one branch line can be connected.)
Connector insertion direction: Vertical
A Terminating Resistor (included as standard) can be connected.
OMRON
DCN1-2R Includes three XW4B-05C1-VIR-D orthogonal connectors with screws
(When used on a trunk line, one branch line can be connected.)
Connector insertion direction: Vertical
A Terminating Resistor (included as standard) can be connected.
OMRON
Model Specifications Manufacturer
DCN1-3C Includes five XW4B-05C1-H1-D parallel connectors with screws
(When used on a trunk line, three branch lines can be connected.)
Connector insertion direction: Horizontal
A Terminating Resistor (included as standard) can be connected.
OMRON
DCN1-4C Includes five XW4B-05C1-H1-D parallel connectors with screws
(When used on a trunk line, three branch lines can be connected.)
Connector insertion direction: Vertical
A Terminating Resistor (included as standard) can be connected.
OMRON
DCN1-4R Includes five XW4B-05C1-VIR-D orthogonal connectors with screws
(When used on a trunk line, three branch lines can be connected.)
Connector insertion direction: Vertical
A Terminating Resistor (included as standard) can be connected.
OMRON
To Next Page
Loading...
