6 - 5
6 Programless Communications
E5C-T Digital Temperature Controllers Programmable Type Communications Manual (H186)
6-1 Programless Communications
6
6-1-5 Connectable PLCs
The PLCs that can be connected are given below.
SYSMAC CS/CJ-series and CP-series PLCs
Note: The CJ1W-CIF11 RS-422A Converter is required to use an RS-232C port.
*1 The Option Board is mounted in the option board slot that is given above.
*2 An RS-485 port is built into only the CP1E-N@@S1.
MELSEC Q-series and L-series PLCs
6-1-5 Connectable PLCs
Name Model number
Communications ports
Port 1 Port 2
Serial Communications Units CJ1W-SCU21-V1
CJ1W-SCU22
RS-232C RS-232C
CJ1W-SCU41-V1
CJ1W-SCU42
RS-422A/485
(Cannot be used.)
CS1W-SCU21-V1 RS-232C
Serial Communications Board CS1W-SCB21-V1 RS-232C RS-232C
CS1W-SCB41-V1
RS-422A/485
(Cannot be used.)
CPU Units CS1/CJ1M CPU Units RS-232C
CJ2 CPU Units RS-232C or option board slot
CP-series CPU Units RS-232C
RS-485
*2
or
option board slot
Serial Communications Option Boards
*1
CP1W-CIF11
CP1W-CIF12
RS-422A/485
Name Model number
Communications ports
Port 1 Port 2
Q Corresponding Serial Communication
Module
QJ71C24N
RS-232C
(Cannot be used.)
RS-422/485
QJ71C24N-R4 RS-422/485
L Corresponding Serial Communication
Module
LJ71C24
RS-232C
(Cannot be used.)