Omron E5CC-T User Manual

5 Advanced Operations
5 - 78
E5@C-T Digital Temperature Controllers User’s Manual (H185)
Additional Information
Priority of Flashing and Alternating Displays on No. 2 Display
The priority for flashing and alternating displays is as follows:
(1) Alternating display with SV status display
(2) Alternating displays/hold display during program end output
The following procedure sets the PV Status Display Function parameter
to ALM1.
Operating Procedure
1 Press the M Key several times in the Advanced Function Set-
ting Level to display pvst (PV Status Display Function).
Advanced Function Setting
Level
2 Press the U or D Key to select alm1 (alarm 1).
The default is off.
3 If the Alarm 1 status is ON in Operation Level, the PV and alm1
(Alarm 1) will be alternately displayed.
Operation Level
off
pvst
PV Status
Display Function
alm1
pvst
100
25
alm1

Omron E5CC-T Specifications

General

Brand	Omron
Model	E5CC-T
Category	Temperature Controller
Language	English