Omron E5CC Quick Start Guide

Page 9 of 37
Shown is the wiring from the K3SC (displayed as Host RS-485) to the E5CC temperature controllers.
Figure 5: E5CC to K3SC Wiring
E5CC Controller Settings
Below are the default settings on the controller.
Figure 6: Default Communications Settings
Each controller needs a unique communications number. Start with unit number 1.
The remaining settings should be default.

Omron E5CC Specifications

General

Number of Display Digits	4 digits
Number of Control Outputs	1
Control Method	ON/OFF
Input Type	Thermocouple, RTD, Analog voltage, Analog current
Supply Voltage	100 to 240 VAC
Output Type	Relay, Voltage, Current
Display Type	LCD
Size	48 x 48 mm
Mounting Method	Panel mount
Control Output	Relay, Voltage, Current
Alarm Output	Relay
Communication	RS-485
Ambient Operating Temperature	-10 to 55°C
Ambient Operating Humidity	25% to 85% RH
Protection Rating	IP66