Omron E5CC Quick Start Guide

Page 31 of 37
Confirm the parameter transfer with the multiple pop-up windows.
Copying Parameters Starting Offline
Make sure that all of the components are wired and power is applied.
Ensure the CS1W-CIP31 cable is connected.
Open CX-Thermo and click no.
Figure 34: CX-Thermo Start Up Screen
This opens the device select screen.
Enter the part number of the temperature controller.

Omron E5CC Specifications

General

Number of Display Digits	4 digits
Number of Control Outputs	1
Control Method	ON/OFF
Input Type	Thermocouple, RTD, Analog voltage, Analog current
Supply Voltage	100 to 240 VAC
Output Type	Relay, Voltage, Current
Display Type	LCD
Size	48 x 48 mm
Mounting Method	Panel mount
Control Output	Relay, Voltage, Current
Alarm Output	Relay
Communication	RS-485
Ambient Operating Temperature	-10 to 55°C
Ambient Operating Humidity	25% to 85% RH
Protection Rating	IP66