Omron E5EC User Manual

5 Advanced Operations
5 - 6
E5@C Digital Temperature Controllers User’s Manual (H174)
• Setting the Scaling Lower Limit
1 Press the M Key several times in the Initial Setting Level to
display in-l (Scaling Lower Limit).
Initial Setting Level
2 Press the U or D Key to set the value to 100.
The default is 0.
• Setting the Decimal Point
1 Press the M Key several times in the Initial Setting Level to
display dp (Decimal Point).
Initial Setting Level
2 Press the U or D Key to set the value to 1.
The default is 0.
0
in-l
Scaling Lower
Limit
100
in-l
0
dp
Decimal Point
1
dp

Omron E5EC Specifications

General

Mounting Type	Panel Mount
Display Resolution	0.1°C or 1°C
Control Method	ON/OFF
Input Type	Thermocouple, RTD, Analog voltage
Supply Voltage	100 to 240 VAC
Output Type	Relay, Voltage, Current
Size	48 x 96 mm
Control Output	Relay, Voltage, Current
Alarm Output	Relay
Communication	RS-485
Ambient Operating Temperature	-10 to 55°C
Ambient Operating Humidity	25 to 85% RH
Protection Rating	IP20