23
3. Using the Unit
3. Inflation stops automatically and the measurement is
started.
As the cuff deflates, decreasing numbers appear on the
display. The heartbeat symbol ( ) flashes at every
heartbeat.
4. When the measurement is complete,
the arm cuff completely deflates. Your
blood pressure and pulse rate are
displayed.
5. Press the START/STOP
button to turn the unit off.
Note: If you forget to turn
the monitor off, it
will automatically
turn off after five
minutes.
Note: Self-diagnosis of measured results and treatment
are dangerous. Please follow the instructions of
your doctor.
HEM-7080-C1_B_M.fm Page 23 Tuesday, March 9, 2010 9:05 AM
To Next Page
Loading...
