Omron HEM-7151T-Z

37
appears
The pulse rate is not
detected correctly.
Apply the arm cuff
correctly, then take
another measurement.
Refer to sub-section 2.4.
Remain still and sit
correctly during a
measurement.
If the “ ” symbol
continues to appear, we
recommend you to
consult with your
physician.
/
appears
does not flash during
a measurement
appears
The monitor has
malfunctioned.
Press the [START/
STOP] button again. If
“Er” still appears, contact
customer service. Refer
to section 12.
appears
The monitor cannot
connect to a smart
device or transmit data
correctly.
Follow the instructions
shown in the “OMRON
connect US/CAN” app. If
the “Err” symbol still
appears after checking
the app, contact
customer service. Refer
to section 12.
Display/Problem Possible Cause Solution