Omron HEM-7151T-Z

38
flashes
The monitor is waiting for
pairing with the smart
device.
Refer to sub-section 4.1
for pairing your monitor
with your smart device,
or press the [START/
STOP] button to cancel
pairing and turn your
monitor off.
flashes
The monitor is ready to
transfer your readings to
the smart device.
Open the “OMRON
connect US/CAN” app to
transfer your readings.
flashes
There are more than 64
readings in memory to
be transferred.
Pair or transfer your
readings to the “OMRON
connect US/CAN” app so
you can keep them in
memory in the app, and
this error symbol
disappears.
The date and time is not
set.
appears
There are 80 readings in
memory to be
transferred.
flashes
Batteries are low.
Replacing all 4 batteries
with new ones is
recommended. Refer to
sub-section 2.1.
Display/Problem Possible Cause Solution