3. Taking a Blood Pressure Measurement and Recording an ECG
EN30
Blood pressure measurement
1) The “ ” symbol flashes at every heartbeat.
Note
• The “ ” symbol appears if the arm cuff is wrapped around the arm
correctly.
• When the “ ” symbol is displayed, the arm cuff is not applied correctly.
Press the BP [START/STOP] button to turn your monitor off, then apply the
cuff correctly.
2) After your monitor has detected your blood pressure and pulse rate,
the cuff automatically deflates.
Your blood pressure and pulse rate are displayed on the monitor.
3) As soon as a blood pressure measurement is complete, the blood
pressure reading will be transferred to your smartphone.
Note
• On the paired smartphone, Bluetooth must be enabled.
WSTART
WINFLATING
WCOMPLETED
BP reading display
for blood pressure measurement
To Next Page
Loading...
