20
USING THE SYSTEM RESET FUNCTION
Use the SYSTEM RESET function in the following cases:
• When the display becomes unrecognizable
Press the SYSTEM RESET Button on the
back of the main unit with a thin stick that
is not easily breakable.
The time is reset.
NOTE:
The data stored in the memory is not deleted.
After all characters on the displays are turned on, the
initial time setting displays appears. (Refer to
“Setting the Time” on page 11)
HJ-720IT-IM.qxd 10/28/05 10:58 AM Page 20
To Next Page
Loading...
