Chapter 6: Acuity Localization
Figure 6-25 Region Tool
6.
Click the dropdown arrow next to the Insert button on the Insert Map Tools toolbar and
click Advanced.
This will open the Advanced Insert dialog box.
7.
Click Clear All, then select just the Light check box in the Advanced Areas section.
8.
In Advanced Options, check the boxes:
l
Include user-created map items, i.e. non-data types
l
Retain overlapping items of the same type in the containing map
NOTE: If lights of different types are physically behind one another in the
environment it may be necessary to scan that space twice, once with just
each light type exclusively. This means that you would have to turn off
lights at one height, then scan, and repeat with only the other lights
turned on.
13732-000 Rev J LDî ±Platform Peripherals Guide 113
To Next Page
Loading...
