56 LDî ±Platform Peripherals Guide 13732-000 Rev J
5.2 î ±Components
Ethernet Port
The Ethernet port, on the back of the call/door box, is used to access the built-in web interface
on the box. The port is shown circled near the top of the following figure.
Figure 5-2 Back of Call/Door Box, Showing Ethernet and VDC
Power Supply and Connector
The call/door boxes come with a 12 V power supply, which connects to the back of the call/-
door box. The connection is circled, near the bottom of the preceding figure.
The power supply connector can only be inserted one way into the back of the box.
Figure 5-3 Power Supply Connector
DIPSwitch
A DIP switch, with four positions, is accessible from the back of the call/door box.
To Next Page
Loading...
