64 LDî ±Platform Peripherals Guide 13732-000 Rev J
5.3 î ±Call/Door Box Configuration
Wireless (WiFi) + Interface + Configuration
This screen lets you configure the wireless network interface.
Figure 5-12 Wireless Interface Configuration Screen
1.
Change the static IPî ±Address to fit your wireless network.
2.
Click Store Permanent to write the configuration change to flash.
The information panel will reflect the changes you made.
3.
Put a temporary label on the front of the call/door box with its IP address.
This will be useful when you need to enter the IP address into MobilePlanner.
Wireless (WiFi) + Link + Status
This shows the wireless link status.
Figure 5-13 Wireless Link Status Screen
To Next Page
