Precautions for Correct Use
Precautions for Correct Use
Install and store the product in a location that meets the following conditions:
• Surrounding temperature of 0 to +40°C (-50 to +75°C in storage)
• No rapid changes in temperature (place where dew does not form)
• Relative humidity of between 5 to 85%
• No presence of corrosive or flammable gases
• Place free of dust, salts and iron particles
• Place free of vibration and shock
• Place out of direct sunlight
• Place where it will not come into contact with water, oils or chemicals
• Place not affected by strong electro-magnetic waves
• Place not near to high-voltage, or high-power equipment
• For good heat dissipation, keep the distance.
• Do not install the product immediately above significant heat sources, such as heaters, transformers,
or large-capacity resistors.
• Do not let the ambient temperature exceed an operating temperature range.
• Provide a forced-air fan cooling or air conditioning if the ambient temperature is near the upper range
of operating temperature range so that the ambient temperature never exceeds the upper range of
operating temperature range.
• Do not install the product in a cabinet containing high-voltage equipment.
• Do not install the reader within 200 mm of power cables.
Installation and Storage Sites
Ambient Temperature
Noise Resistance
9
MicroHAWK F320-F / F330-F / F420-F / F430-F Smart Camera User Manual
To Next Page
Loading...
Need help?
General
