69
Accessories Section 15-9
15-9-5 Explosion Proof Kit for MS4800
Designed for use in explosive environments, the MS4800-EPKT kit consists
of a transmitter and receiver housing. The explosion proof kit for MS4800 is
available in 4 sizes:
System complies: EN50014 (1997) incl. A1-A2 (1997)
EN50018 (2000) incl. A1 (2002)
EN50281-1-1 (1998) incl. A1 (2002)
UL certificate with US and Canadian directives
15-9-6 IP67-Enclosure for MS4800 (standalone)
Please use the following coding to order the IP67-enclosures:
MS4800-IP67-XXXX where XXXX is the length of the protection field.
15-9-7 Welding protection shield (Sputter protection)
Please use the following coding to order the welding protection shield (Lexan
front window):
MS4800-WS-XXXX where XXXX is the length of the protection field.
15-9-8 Shock Mounting Kits
These kits are used to isolate light curtain receivers and transmitters from
possible source of vibration. They can also be used to shockmount control-
lers/power supplies and mirrors. Each kit consists of eight mounting parts.
Shock Mounting Kit for:
– Weight Class 2 (sensor length from 280-960 mm): 42591 SHMS-18
– Weight Class 3 (sensor length from 1000-1400 mm): 41768 SHP4-18
– Weight Class 4 (sensor length from 1440-2120 mm): 41768 SHP4-18
15-9-8-1 Mounting Kit
MS4800-MKT2, Head Mounting Kit for the alignment of the MS_800 light
curtain.
MS4800-EPKT-0320 Explosion proof housing for
MS4800-014-0320
MS4800-030-0320
MS4800-EPKT-0640 Explosion proof housing for
MS4800-030-0640
MS4800-EPKT-0960 Explosion proof housing for
MS4800-030-0960
MS 4800-EPKT-1240 Explosion proof housing for
MS4800-030-1240
To Next Page
Loading...
